Garages, homes & businesses across Irving

Epoxy Flooring in Irving, TX

Irving Epoxy Flooring installs garage floor coatings, polyaspartic systems and commercial epoxy over concrete that's diamond-ground, crack-repaired and moisture-checked first — the prep that keeps a coating bonded on North Texas clay soil.

Call (972) 640-6524 for a Free Estimate
  • Crack and joint repair planned for shifting clay-soil slabs
  • Early-morning installs to beat summer garage heat
  • Free on-site estimate with a written quote

Get a Free Estimate

Tell us about your floor and we'll call you back the same working day.

Prefer to talk? Call (972) 640-6524

What Is Epoxy Flooring in Irving?

Epoxy flooring in Irving is a resin coating that bonds to bare concrete and turns a dusty, stained slab into a sealed, easy-to-clean surface. Most of our work is home garages, but the same systems go down in shops, warehouses, patios and restaurant kitchens.

A real coating is not paint. It's a multi-coat system: a penetrating base coat, decorative vinyl flakes or metallic pigment, and a clear topcoat that takes the wear. Applied over ground concrete, it resists oil, brake fluid, pool chemicals and the grit that tracks in on tires.

Homeowners usually call us when the garage floor starts to look rough, when they're getting a house ready to sell, or when a cheap DIY kit has started peeling.

Crew squeegeeing a fresh epoxy coat across a warehouse floor

Epoxy Floor Coatings We Install in Irving

Every system starts with the same grind-and-repair prep. What changes is the look, the cure time and where the floor will be used.

Not sure which one fits? See all of our epoxy flooring services or call (972) 640-6524.

When Do You Need Epoxy Flooring?

You need epoxy flooring when bare concrete stops holding up to how you use the space. These are the situations that bring most Irving callers to us.

Dusting and stains

The slab sheds powder, holds oil drips and never looks clean no matter how often you hose it out.

Peeling DIY coating

A store-bought kit is lifting under the tires or flaking at the door line. It has to be ground off before a real system goes down.

New cracks

Hairline or settled cracks have opened up as the clay under the slab dried out and swelled back. They're worth sealing before they widen.

Selling the house

A finished garage stands out in a listing and tells buyers the home was cared for.

Inspection or safety

A shop, kitchen or warehouse needs a floor that's sealed, easy to clean and marked for safe traffic lanes.

How Epoxy Flooring Works in Irving

A typical two-car garage takes one to two days on site. Here's how the work goes from first call to a floor you can park on.

  1. Free on-site estimate

    We measure the floor, test it for moisture, map the cracks and joints, and walk you through flake colors and systems. You get a written quote.

  2. Diamond grinding

    Planetary grinders with dust-collecting vacuums open up the concrete and remove old sealers, paint and oil-soaked surface.

  3. Crack and joint repair

    Cracks are chased out and filled, pitted spots are patched, and control joints are handled so normal slab movement won't split the coating.

  4. Base coat and flakes

    A penetrating base coat goes down and vinyl flakes are broadcast into it while it's wet. Loose flakes are scraped and vacuumed once it sets.

  5. Clear topcoat

    A polyaspartic or urethane topcoat locks everything in and sets the final texture. We go over care instructions before we leave.

Why Irving Homeowners Choose Us

01

Prep built for clay-soil slabs

Irving sits on expansive clay that swells when it rains and shrinks in a dry August. We plan crack repair and joint treatment into every quote instead of coating over problems and hoping they stay hidden.

02

Heat-aware scheduling

An attached garage can top 100 degrees on a summer afternoon. We check slab temperature, start early and choose products with a working time that suits the day, so the coating cures evenly instead of rushing.

03

One crew, start to finish

The same installers who grind your floor lay the coating and do the final walk-through. You get one point of contact and a phone number that's answered.

How Much Does Epoxy Flooring Cost in Irving?

The cost of epoxy flooring in Irving comes down to the size of the space and the condition of the concrete. Every floor is different, so we quote after seeing it rather than guessing over the phone.

Book a free on-site estimate and we'll measure, test and give you a written quote with no obligation.

Call for a Free Estimate

What goes into your quote

  • Square footage — a one-car garage, a three-car garage and a warehouse bay are very different jobs.
  • Slab condition — cracks, spalling, oil saturation and old coatings all add prep time.
  • Coating system — flake, solid color, metallic or a heavy-duty commercial build.
  • Moisture — a damp slab may need a moisture-mitigating primer.
  • Extras — stem walls, steps, cove base or anti-slip texture.

Is Epoxy Flooring Right for You?

An epoxy floor is a long-term upgrade, so it helps to know whether your space and plans are a good match before you call.

A great fit if you…

  • Park in the garage or use it as a gym, shop or storage space
  • Want a floor that wipes clean and won't shed concrete dust
  • Plan to stay in the home or want stronger curb appeal for a sale
  • Run a business that needs a sealed, inspection-ready floor

Maybe not the right call if…

  • The slab is still heaving or sinking and needs foundation repair first
  • The concrete was poured in the last 28 days and hasn't cured
  • You need a floor down this afternoon with no prep time
  • The space is an unsealed patio that floods or holds standing water

Coatings for Irving Shops, Warehouses and Flex Space

Irving's commercial floors take a different kind of punishment than a home garage, and the system has to match.

Between Las Colinas offices, the distribution buildings along Highway 161 and the small shops off Belt Line Road, Irving has a lot of concrete that works for a living. Forklifts, pallet jacks, floor scrubbers and daily chemical cleaning wear through a thin residential coating in a season. For those spaces we build thicker: a penetrating primer, a high-build epoxy body coat, and a urethane or polyaspartic wear layer rated for rolling loads.

Detail shops and auto bays get a chemical-resistant topcoat that stands up to brake cleaner and degreaser, plus a texture you can trust when the floor is wet. Food and beverage back rooms call for a seamless, coved finish that meets health inspection standards and does not harbor bacteria in joints. Showrooms and flex offices in the Urban Center usually want the opposite: a smooth, satin or metallic finish that reads as a designed floor rather than a shop floor.

Scheduling matters as much as materials for a business. We work nights and weekends so a bay or a sales floor is back in service by Monday, and we phase larger warehouses so operations never fully stop. The Epoxy solutions we propose always come with a cure schedule in writing, so you know exactly when staff can walk on it and when equipment can roll.

Questions to Ask Before Hiring in Irving

A garage coating is a long-term purchase. These questions separate the installers who will still be around when it matters.

Start with prep. Ask whether the slab will be diamond-ground or acid-etched. Grinding is the right answer for North Texas concrete, because it opens the surface evenly and removes the laitance that causes coatings to peel. Ask about moisture testing, since clay soils around Valley Ranch and south Irving hold water and push vapor up through slabs after heavy spring rains.

Ask what the system is made of, layer by layer, and which layer is on top. A UV-stable topcoat is not optional in a garage that faces the afternoon sun, and the answer should name a specific product, not just a brand. Ask how cracks and control joints will be treated. A good epoxy flooring contractor fills them with a flexible compound before coating so they do not telegraph through, and will tell you plainly that a joint which keeps moving will eventually show again.

Finally, ask for addresses, not just photos. A floor installed three Texas summers ago that still looks right tells you more than any portfolio. Ask what the warranty covers and what voids it, and get the cure times in writing so you know when the car goes back in. Clear answers to those questions are a better predictor of a lasting floor than any quote.

Living With a Coated Garage Floor in North Texas

Irving weather swings from ice storms to triple digits. Here is how to keep a coated floor looking new through all of it.

Summer is the main test. Tires coming off I-635 or 114 in August are hot enough to soften cheap paint, which is why a properly cured, professionally applied topcoat matters. Even so, give a new floor its full cure time before parking, and pull in slowly rather than turning the wheel on the spot in the first few weeks.

Winter brings a different problem. The occasional ice storm means sand and de-icer tracked in from the street, and that grit grinds under tires if it sits. Sweep or dust-mop weekly, and rinse the tire paths after a storm. Warm water with a neutral cleaner handles the rest. Skip citrus degreasers and anything acidic, which can dull the topcoat over time.

Spring storms and the clay soil under most Irving homes mean slabs can move slightly, so a hairline crack that reappears at a control joint is normal and does not mean the coating failed. Wipe up oil and brake fluid promptly, use a mat under lawn equipment, and put pads under jack stands. With that routine, our epoxy flooring services deliver a floor that still looks new a decade on, and if the parking lane ever dulls, a fresh topcoat over the existing system brings the gloss back in a morning.

Frequently Asked Questions About Epoxy Flooring in Irving

How much does epoxy flooring cost in Irving?

The price depends on the size of the floor, how much crack repair the slab needs and which coating system you pick. We measure the floor, check it for moisture and cracks at a free on-site estimate, and give you a written quote before anything is scheduled.

Will the clay soil in Irving crack my new epoxy floor?

Expansive clay makes slabs move, so we treat every crack before coating. Hairline and settled cracks are ground out and filled with a repair compound, and active control joints are kept open or filled with a flexible material so normal slab movement does not split the finish.

Can you install an epoxy floor in the Texas summer heat?

Yes, but the schedule changes. Garage slabs and resin both get hot by midday, which shortens working time, so summer installs start early in the morning and we check the slab temperature before mixing anything.

Will hot tires lift my garage floor coating?

Hot tire pickup happens with thin, one-part epoxy paints from a hardware store. A diamond-ground slab with a high-solids base coat and a polyaspartic topcoat bonds deep enough that hot tires coming off a summer driveway do not peel it.

How soon can I park in my garage again?

With a polyaspartic flake system, most garages can take foot traffic the same evening and cars in about 24 to 48 hours. A traditional epoxy system usually needs several days before vehicles go back in. You get the exact timeline for your floor at the estimate.

How long does an epoxy garage floor last?

A professionally installed coating over a properly ground slab typically lasts 15 to 20 years in a home garage. The clear topcoat takes most of the wear and can be scuffed and recoated later instead of redoing the whole floor.

Do you have to grind the concrete first?

Yes. Diamond grinding opens the pores of the concrete so the resin locks in instead of sitting on top. Acid etching alone is weaker and is one of the main reasons DIY garage coatings peel within a year or two.

Is an epoxy floor slippery when wet?

A smooth high-gloss finish can be slick when wet. Flake floors have a natural texture, and we can add a fine anti-slip grit to the topcoat for garages that get rain tracked in, patios and commercial kitchens.

Ready for a Garage Floor You Don't Have to Hide?

Call Irving Epoxy Flooring for a free on-site estimate. We'll measure, test the slab and give you a written quote.

Where We’re Based

811 N O'Connor Rd, Irving, TX 75061

Please note: This is our service business address — not a storefront or showroom. Irving Epoxy Flooring is a mobile epoxy flooring service, so we come to you and the office isn’t open to walk-in visitors. Call us and we’ll set up a free on-site estimate.